Mode | Contents |
---|---|
MODE page 01h |
SCSI Read-write error recovery page: Automatic write reallocation is enabled |
MODE page 04h |
SCSI Rigid disk drive geometry page: 16 heads 4161 cylinders Drive steps in 20000 ns Heads park in cylinder 16777215 Medium rotates at 5400 rpm Spindle synchronization is disable or unsupported |
MODE page 05h |
SCSI Flexible disk page: Transfer rate: 5000 kbit/s 16 heads 4161 cylinders 63 sectors per track 512 bytes per sector Drive steps in 100 μs Each step pulse is 1 ms Heads settles in 100 μs Target shall wait 10 seconds before attempting to access the medium after motor on is asserted Target shall wait 10 seconds before releasing the motor on signal after becoming idle Drive needs to do 1 step pulses per cylinder Medium rotates at 5400 rpm Pin 34 is unconnected Pin 4 is unconnected Pin 2 is unconnected Pin 1 is unconnected |
MODE page 08h |
SCSI Caching mode page: Write-cache is enabled Drive does not distinguish between cached read data Drive does not distinguish between cached write data No pre-fetch will be done |
EVPD | Contents |
---|---|
EVPD page 00h | Undecoded |
EVPD page 83h |
SCSI Device identification: Identifier belongs to addressed logical unit Vendor descriptor contains: myhd |
EVPD page B0h |
SCSI Sequential-access Device Capabilities: Device supports WORM media |
EVPD page B2h |
TapeAlert Supported Flags Bitmap: 0x0000000000000000 |