Aaru Report for IOMEGA Clik! 40 CZ 30cJ

ATAPI characteristics:
ATAPI device
Model: IOMEGA Clik! 40 CZ ATAPI
Firmware revision: 30cJ
Supported ATA versions: ATA-1 ATA-2 ATA-3 ATA/ATAPI-4
Maximum ATA revision supported: ATA/ATAPI-4 T13 1153D revision 15
Parallel ATA device:

ATAPI Direct-access device
Device shall assert INTRQ when DRQ is set to one
ATAPI device uses 12 byte command packet
Device capabilities:
IORDY is supported and can be disabled
At minimum 500 ns. transfer cycle time per word in PIO, without flow control
At minimum 180 ns. transfer cycle time per word in PIO, with IORDY flow control
Command set and features:
NOP is supported and enabled
DEVICE RESET is supported and enabled
PACKET is supported and enabled
Power management is supported and enabled
28-bit LBA is supported
Removable Media Status Notification is supported
Removable Media Status Notification feature set is supported

SCSI characteristics:
Vendor: IOMEGA (Iomega)
Product: Clik! 40 CZ
Revision: 30cJ
Device is connected and supported.
Direct-access device
Device claims to comply with ANSI X3.408:2005 (SPC-3)
Device does not claim to comply with any SCSI ECMA standard
Device does not claim to comply with any SCSI ISO/IEC standard
Device is removable
Device supports setting Normal ACA
Device supports LUN hierarchical addressing
Device does not support asymmetrical access
Device supports only ST clocking
Device supports MODE SENSE (6)
Device supports MODE SENSE (10)

SCSI mode sense pages:
Mode Contents
MODE page 01h SCSI Read-write error recovery page:
Automatic write reallocation is enabled
Automatic read reallocation is enabled
Drive will use the most expedient form of error recovery first
Drive will repeat read operations 44 times
MODE page 2Fh Unknown mode page

Tested media:
Information for medium named "Clik!"
Medium type code: 00h
Drive recognizes this medium.
Medium manufactured by: IOMEGA
Medium model: Clik!
Logical sector size: 512 bytes
READ LONG sector size: 564 bytes
Medium has 78882 blocks of 512 bytes each
Medium size: 40387584 bytes, 40 Mb, 38.52 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ LONG (10) command with this medium