Mode | Contents |
---|---|
MODE page 02h |
SCSI Disconnect-Reconnect mode page: 2000 µs maximum permitted to assert BSY without a REQ/ACK handshake 65536 bytes maximum can be transferred before disconnecting Data transfer disconnect control is not used |
MODE page 0Fh |
SCSI Data compression page: Drive supports data compression Data compression is enabled with DCLZ Data decompression is enabled Last data read was uncompressed Report exception on compression is set to 0 |
MODE page 10h |
SCSI Device configuration page: Active format: 8 Active partition: 0 Write buffer shall have a full ratio of 0 before being flushed to medium Read buffer shall have an empty ratio of 0 before more data is read from medium Drive will delay 20000 ms before buffered data is forcefully written to the medium even before buffer is full Medium supports block IDs Drive reports setmarks Drive will pre-read until buffer is full Drive generates end-of-data Drive does not use compression |
MODE page 11h |
SCSI medium partition page: 1 maximum additional partitions 0 additional partitions defined Device may erase any or all partitions on MODE SELECT for partitioning Partitions are defined in megabytes Device is capable of recognizing both medium partitions and format Medium has defined 1 partitions Device recognizes one single partition spanning whole medium |
MODE page 1Ch |
SCSI Informational exceptions control page: Informational exceptions are disabled |
MODE page 3Eh |
HP CD-ROM Emulation/Disaster Recovery Mode Page: Drive is not emulating a CD-ROM drive |
EVPD | Contents |
---|---|
EVPD page 00h | Undecoded |
EVPD page 01h | FRU 1 fail. Brain Dead. |
EVPD page 02h | FRU 2 fail. Brain Dead. |
EVPD page 03h | FRU 3 fail. Brain Dead. |
EVPD page C0h | Undecoded |
EVPD page C1h | Undecoded |