ATA characteristics:
ATA device
Model: TOSHIBA MK8026GAX
Firmware revision: PA002D
Supported ATA versions: ATA-1 ATA-2 ATA-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
Maximum ATA revision supported: Minor ATA version not specified
Parallel ATA device:
PIO timing mode: 2
Advanced PIO: PIO0 PIO1
Single-word DMA: DMA0 DMA1 DMA2
Multi-word DMA: MDMA0 MDMA1 MDMA2
Ultra DMA: UDMA0 UDMA1 UDMA2 (active) UDMA3 UDMA4 UDMA5
Logical sector size: 512 bytes
READ LONG sector size: 560 bytes
Cylinders: 16383 max., 16383 current
Heads: 16 max., 16 current
Sectors per track: 63 max., 63 current
Sectors addressable in CHS mode: 16514064 max., 16514064 current
Device size in CHS mode: 8455200768 bytes, 8455 Mb, 8063.51 MiB
Sectors addressable in sectors in 28-bit LBA mode: 156301488
Device size in 28-bit LBA mode: 80026361856 bytes, 80 Gb, 74.53 GiB

Device is fixed
Device does not require SET FEATURES to spin up and IDENTIFY DEVICE response is complete.
Device capabilities:
Standby time values are standard
IORDY is supported and can be disabled
DMA is supported
A maximum of 16 sectors can be transferred per interrupt on READ/WRITE MULTIPLE
Device supports setting a maximum of 16 sectors
At minimum 120 ns. transfer cycle time per word in MDMA, 120 ns. recommended
At minimum 120 ns. transfer cycle time per word in PIO, without flow control
At minimum 120 ns. transfer cycle time per word in PIO, with IORDY flow control
Command set and features:
NOP is supported and enabled
READ BUFFER is supported and enabled
WRITE BUFFER is supported and enabled
Host Protected Area is supported and enabled
Look-ahead read is supported and enabled
Write cache is supported and enabled
Power management is supported and enabled
Security mode is supported
28-bit LBA is supported
FLUSH CACHE is supported and enabled
Device Configuration Overlay feature set is supported and enabled
Automatic Acoustic Management is supported and enabled with value 128 (vendor recommends 254
SET MAX security extension is supported
Advanced Power Management is supported and enabled with value 254
S.M.A.R.T. is supported and enabled
S.M.A.R.T. self-testing is supported and enabled
S.M.A.R.T. error logging is supported and enabled
Security:
Security is not enabled
58 minutes to complete secure erase
Master password revision code: 65534

Device supports READ SECTOR(S) command in CHS mode
Device supports READ SECTOR(S) RETRY command in CHS mode
Device supports READ DMA command in CHS mode
Device supports READ DMA RETRY command in CHS mode
Device supports READ SECTOR(S) command in 28-bit LBA mode
Device supports READ SECTOR(S) RETRY command in 28-bit LBA mode
Device supports READ DMA command in 28-bit LBA mode
Device supports READ DMA RETRY command in 28-bit LBA mode
Device supports SEEK command in CHS mode
Device supports SEEK command in 28-bit LBA mode