ATA characteristics:
ATA device
Model: SAMSUNG HM160HC
Firmware revision: LQ100-10
Supported ATA versions: ATA-1 ATA-2 ATA-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7 ATA8-ACS
Maximum ATA revision supported: ATA/ATAPI-7 T13 1532D revision 0
Parallel ATA device: ATA/ATAPI-7 ATA8-APT
PIO timing mode: 2
DMA timing mode: 2
Advanced PIO: PIO0 PIO1
Multi-word DMA: MDMA0 MDMA1 MDMA2
Ultra DMA: UDMA0 UDMA1 UDMA2 (active) UDMA3 UDMA4 UDMA5
Logical sector size: 512 bytes
READ LONG sector size: 572 bytes
Cylinders: 16383 max., 16383 current
Heads: 16 max., 16 current
Sectors per track: 63 max., 63 current
Sectors addressable in CHS mode: 16514064 max., 16514064 current
Device size in CHS mode: 8455200768 bytes, 8455 Mb, 8063.51 MiB
Sectors addressable in sectors in 28-bit LBA mode: 268435455
Device size in 28-bit LBA mode: 137438952960 bytes, 137 Gb, 128.00 GiB
Sectors addressable in sectors in 48-bit LBA mode: 312581808
Device size in 48-bit LBA mode: 160041885696 bytes, 160 Gb, 149.05 GiB
Bytes per unformatted track: 34902
Bytes per unformatted sector: 554

Device is fixed
Device transfer rate is > 10 Mb/s
Device is hard sectored
Device is not MFM encoded
Head switch time is bigger than 15 µs.
Device does not require SET FEATURES to spin up and IDENTIFY DEVICE response is complete.
0 KiB of dual ported multi sector buffer with read caching
Device capabilities:
Standby time values are standard
IORDY is supported and can be disabled
DMA is supported
At minimum 120 ns. transfer cycle time per word in MDMA, 120 ns. recommended
At minimum 120 ns. transfer cycle time per word in PIO, without flow control
At minimum 120 ns. transfer cycle time per word in PIO, with IORDY flow control
Command set and features:
NOP is supported and enabled
READ BUFFER is supported and enabled
WRITE BUFFER is supported and enabled
Host Protected Area is supported and enabled
Look-ahead read is supported and enabled
Write cache is supported and enabled
Power management is supported and enabled
Security mode is supported
28-bit LBA is supported
48-bit LBA is supported and enabled
FLUSH CACHE is supported and enabled
FLUSH CACHE EXT is supported and enabled
Device Configuration Overlay feature set is supported and enabled
Automatic Acoustic Management is supported and enabled with value 128 (vendor recommends 254
SET MAX security extension is supported
Advanced Power Management is supported and enabled with value 254
DOWNLOAD MICROCODE is supported and enabled
S.M.A.R.T. is supported and enabled
S.M.A.R.T. Command Transport is supported
S.M.A.R.T. self-testing is supported and enabled
S.M.A.R.T. error logging is supported and enabled
IDLE IMMEDIATE with UNLOAD FEATURE is supported and enabled
Device has a World Wide Name
General Purpose Logging is supported and enabled
Segmented feature in DOWNLOAD MICROCODE is supported and enabled
READ/WRITE DMA EXT GPL are supported and enabled
WRITE UNCORRECTABLE is supported and enabled
Write/Read/Verify is supported and enabled
0 sectors for Write/Read/Verify mode 2
0 sectors for Write/Read/Verify mode 3
Current Write/Read/Verify mode: 0
Security:
Security is not enabled
Supports enhanced security erase
54 minutes to complete secure erase
54 minutes to complete enhanced secure erase
Master password revision code: 65534
S.M.A.R.T. Command Transport (SCT):
SCT Long Sector Address is supported
SCT Write Same is supported
SCT Error Recovery Control is supported
SCT Features Control is supported
SCT Data Tables are supported

Device supports READ SECTOR(S) command in CHS mode
Device supports READ SECTOR(S) RETRY command in CHS mode
Device supports READ DMA command in CHS mode
Device supports READ DMA RETRY command in CHS mode
Device supports READ SECTOR(S) command in 28-bit LBA mode
Device supports READ SECTOR(S) RETRY command in 28-bit LBA mode
Device supports READ DMA command in 28-bit LBA mode
Device supports READ DMA RETRY command in 28-bit LBA mode
Device supports READ SECTOR(S) command in 48-bit LBA mode
Device supports READ DMA command in 48-bit LBA mode
Device supports SEEK command in CHS mode
Device supports SEEK command in 28-bit LBA mode