Aaru Report for
FUJITSU
MCE3130SS
0070
SCSI characteristics:
Vendor: FUJITSU
Product: MCE3130SS
Revision: 0070
Device is connected and supported.
Direct-access device
Device claims to comply with ANSI X3.131:1994 (SCSI-2)
Device does not claim to comply with any SCSI ECMA standard
Device does not claim to comply with any SCSI ISO/IEC standard
Device is removable
Device supports synchronous data transfer
Device does not support asymmetrical access
Device supports only ST clocking
Device complies with unknown standard code 0x3330
Device complies with unknown standard code 0x3030
Device complies with unknown standard code 0x3130
Device supports MODE SENSE (6)
Drive supports DPO and FUA bits
SCSI mode sense pages:
| Mode |
Contents |
|
MODE page 01h
|
SCSI Read-write error recovery page:
Parameters can be saved
Automatic write reallocation is enabled
Drive will repeat read operations 31 times
Drive will repeat write operations 1 times
|
|
MODE page 02h
|
SCSI Disconnect-Reconnect mode page:
Parameters can be saved
128 ratio of buffer that shall be full prior to attempting a reselection
Data transfer disconnect control is not used
|
|
MODE page 03h
|
SCSI Format device page:
8 tracks per zone to use in dividing the capacity for the purpose of allocating alternate sectors
8 sectors per zone that shall be reserved for defect handling
0 tracks per zone that shall be reserved for defect handling
0 tracks per LUN that shall be reserved for defect handling
64 physical sectors per track
0 Bytes per physical sector
Target-dependent interleave value is 0
0 sectors between last block of one track and first block of the next
0 sectors between last block of a cylinder and first block of the next one
Drive supports hard-sectoring format
Drive media is removable
Sector addressing is progressively incremented in one cylinder before going to the next
|
|
MODE page 04h
|
SCSI Rigid disk drive geometry page:
8 heads
1197 cylinders
Write pre-compensation starts at cylinder 0
Write current reduction starts at cylinder 0
Heads park in cylinder 0
Spindle synchronization is disable or unsupported
|
|
MODE page 08h
|
SCSI Caching mode page:
Parameters can be saved
Drive does not distinguish between cached read data
Drive does not distinguish between cached write data
No pre-fetch will be done
Drive should not reorder the sequence of write commands to be faster
Drive should have 6 cache segments
|
|
MODE page 0Ah
|
SCSI Control mode page:
Parameters can be saved
The logical unit maintains one task set for all nexuses
Commands should be sent strictly ordered
If ACA is established, the task set commands shall resume after it is cleared, otherwise they shall terminate with CHECK CONDITION
LUN shall clear unit attention condition reported in the same nexus
On medium insertion, it shall be loaded for full access
|
|
MODE page 20h
|
Unknown mode page
|
|
MODE page 00h
|
Unknown vendor mode page
|
Tested media:
Information for medium named "ECMA-351"
Medium type code: 03h
Drive recognizes this medium.
Medium manufactured by: Fujitsu
Medium model: GigaMo
Density code: 00h
Logical sector size: 2048 bytes
READ LONG sector size: 2380 bytes
Medium has 605846 blocks of 2048 bytes each
Medium size: 1240772608 bytes, 1 Gb, 1.16 GiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ (10) command with this medium
Device can use the READ LONG (10) command with this medium
Information for medium named "ECMA-154"
Medium type code: 03h
Drive recognizes this medium.
Medium manufactured by: ECMA
Medium model: ECMA 154
Density code: 00h
Logical sector size: 512 bytes
READ LONG sector size: 600 bytes
Medium has 248826 blocks of 512 bytes each
Medium size: 127398912 bytes, 127 Mb, 121.50 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ (10) command with this medium
Device can use the READ LONG (10) command with this medium
Information for medium named "ECMA-201"
Medium type code: 03h
Drive recognizes this medium.
Medium manufactured by: ECMA
Medium model: ECMA 201
Density code: 00h
Logical sector size: 512 bytes
READ LONG sector size: 600 bytes
Medium has 446325 blocks of 512 bytes each
Medium size: 228518400 bytes, 228 Mb, 217.93 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ (10) command with this medium
Device can use the READ LONG (10) command with this medium
Information for medium named "ISO-15041"
Medium type code: 03h
Drive recognizes this medium.
Medium manufactured by: ISO
Medium model: ISO 15041
Density code: 00h
Logical sector size: 512 bytes
READ LONG sector size: 600 bytes
Medium has 1041500 blocks of 512 bytes each
Medium size: 533248000 bytes, 533 Mb, 508.54 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ (10) command with this medium
Device can use the READ LONG (10) command with this medium
Information for medium named "ECMA-239"
Medium type code: 03h
Drive recognizes this medium.
Medium manufactured by: ECMA
Medium model: ECMA 239
Density code: 00h
Logical sector size: 2048 bytes
READ LONG sector size: 2380 bytes
Medium has 310352 blocks of 2048 bytes each
Medium size: 635600896 bytes, 635 Mb, 606.16 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ (10) command with this medium
Device can use the READ LONG (10) command with this medium