MultiMediaCard device:
MultiMediaCard Device Identification Register:
Manufacturer: Unknown manufacturer ID 0x88
BGA device
Application ID: 0
Product name: SLD64G
Product revision: 01.06
Product serial number: 0
Device manufactured month 0 of 1997 or 2013
CID CRC: 0x00


MultiMediaCard Device Specific Data Register:
Register version is defined in Extended Device Specific Data Register
Asynchronous data access time is 80ms
Clock dependent part of data access is 25500 clock cycles
Device's clock frequency: 26MHz
Device support command classes 0 2 4 5 6 7 8 11
Read block length is 512 bytes
Device may be bigger than 2GiB and have its real size defined in the extended CSD
Device has 2097152 blocks
Device has 1024 MiB
Device uses a maximum of 100mA for reading at minimum voltage
Device uses a maximum of 200mA for reading at maximum voltage
Device uses a maximum of 100mA for writing at minimum voltage
Device uses a maximum of 200mA for writing at maximum voltage
Device can erase a minimum of 1024 blocks at a time
Device can write protect regions
Device can write protect a minimum of 1025 blocks at a time
Device uses no ECC by default
Writing is 32 times slower than reading
Write block length is 512 bytes
Device contents are original
Device is formatted like a hard disk
Device currently uses no ECC
CSD CRC: 0x00


MultiMediaCard Extended Device Specific Data Register:
Device supports standard MMC command set
Device implements HPI using CMD13
Device supports background operations
Device supports a maximum of 63 packed reads and 63 packed writes
Device supports Data Tag
Tags must be in units of 8 sectors
Tag resources size is 0.
Max context ID is 5.
Large unit maximum multiplier is 1.
Large unit size is 8 MiB
Device supports non-persistent extended partitions
Device supports system code extended partitions
Device supports FFU
Device supports Vendor Specific Mode
Device supports command queuing with a depth of 32
0 firmware sectors correctly programmed
Device used between 0% and 10% of its estimated life time
Device used between 0% and 10% of its estimated life time
Device informs it's in good health
Device does not report an optimal read size
Optimal write size is 128 KiB
Optimal trim size is 4 KiB
Device version: 0
Firmware version: 283
Device has 8192 KiB of cache
Device takes a maximum of 100 ms by default for a SWITCH command
Device takes a maximum of 600 by default to power off from a SWITCH command notification
Device has no pending background operations
Last WRITE MULTIPLE command correctly programmed 0 sectors
Device takes a maximum of 3000 ms for initialization after partition
Device takes a maximum of 1500 ms for trimming a single erase group
Device supports the sanitize operation
Device supports supports the secure and insecure trim operations
Device supports automatic erase on retired defective blocks
Device supports secure purge operations
Device takes a maximum of 8100 ms for securely erasing a single erase group
Device takes a maximum of 5100 ms for securely trimming a single erase group
Device supports high speed timing on boot
Device supports dual data rate on boot
Device supports alternative boot method
Device has a 4096 KiB boot partition
Device has a page size of 16 KiB
Device erase groups are 512 KiB
Device takes a maximum of 1500 ms for erasing a single erase group
Device smallest write protect group is made of 8 erase groups
Device uses 128 μA on Vcc when sleeping
Device uses 128 μA on Vccq when sleeping
Device takes a maximum of 419.4304 ms to transition between sleep and standby states
Device takes a maximum of 655.36 ms to move to sleep state
Device has 120832000 sectors
Device supports secure write protection
Device cannot achieve 2.4MB/s reading in SDR 26Mhz mode
Device cannot achieve 2.4MB/s reading in SDR 26Mhz 4-bit mode
Device cannot achieve 2.4MB/s reading in SDR 52Mhz mode
Device cannot achieve 4.8MB/s reading in DDR 52Mhz mode
Device cannot achieve 2.4MB/s writing in SDR 26Mhz mode
Device cannot achieve 2.4MB/s writing in SDR 26Mhz 4-bit mode
Device cannot achieve 2.4MB/s writing in SDR 52Mhz mode
Device cannot achieve 4.8MB/s writing in DDR 52Mhz mode
Device can take a maximum of 100 ms when switching partitions
Device can take a maximum of 50 ms when releasing from an interrupt
Device supports I/O driver strength type 0.
Device supports 26 Mhz mode
Device supports 52 Mhz mode
Device supports DDR 52 Mhz mode at 1.8V or 3V
Device supports HS-200 mode (SDR 200Mhz) at 1.8V
Device supports HS-400 mode (DDR 200Mhz) at 1.8V
CSD version 1.2 revision 1.8
Device follows compatibility MMC command set.
Device is in HS-400 mode.
Selected driver strength is type 0.
Device supports enhanced strobe mode
Device uses strobe during Data Out and CRC responses
Device is using 1-bit data bus
Erased memory range shall be '0'.
Device is not boot enabled
There is no access to boot partition
Device will boot up in x1 SDR or x4 DDR bus width.
Device will reset boot conditions to compatibility mode after boot operation.
Device will use single data rate with compatible timings in boot operation.
Device will use high capacity erase unit size, timeout and write protect group size definitions.
Boot area 1 is not protected
Boot area 2 is not protected
Permanent write protection of boot areas is disabled.
Device has a 4096 KiB replay protected memory block
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute.
Device natively uses 512 byte sectors
Device is emulating 512 byte sectors
Device currently addresses 512 byte sectors
Device's cache is enabled