| Mode | Contents |
|---|---|
| MODE page 08h |
SCSI Caching mode page: Write-cache is enabled Drive does not distinguish between cached read data Drive does not distinguish between cached write data Pre-fetch will be done for READ commands of 65535 blocks or less A maximum of 65535 blocks will be pre-fetched A maximum of 65535 blocks will be pre-fetched even if it is commanded to pre-fetch more Pre-fetch can continue across discontinuities (such as cylinders or tracks) Drive should have 255 cache segments |
| MODE page 0Ah |
SCSI Control mode page: Parameters can be saved The logical unit maintains one task set for all nexuses Commands can be reordered in any manner If ACA is established, the task set commands shall resume after it is cleared, otherwise they shall terminate with CHECK CONDITION LUN shall clear unit attention condition reported in the same nexus On medium insertion, it shall be loaded for full access |
| MODE page 1Ah |
SCSI Power condition page: Parameters can be saved Standby timer Z is set to 900000 ms Drive will not enter idle mode |
| EVPD | Contents |
|---|---|
| EVPD page 00h | Undecoded |
| EVPD page 83h |
SCSI Device identification: Identifier belongs to addressed logical unit NAA: 00:00:00:00:00:00:00:00 Identifier belongs to addressed logical unit Inquiry descriptor contains: |
| EVPD page B0h |
SCSI Sequential-access Device Capabilities: |
| EVPD page B2h |
TapeAlert Supported Flags Bitmap: 0x0000000000000000 |
| EVPD page C1h | Undecoded |
| EVPD page C2h | Undecoded |