| Mode | Contents |
|---|---|
| MODE page 01h |
SCSI Read-write error recovery page: Parameters can be saved |
| MODE page 02h |
SCSI Disconnect-Reconnect mode page: Parameters can be saved 192 ratio of buffer that shall be full prior to attempting a reselection 128 ratio of buffer that shall be empty prior to attempting a reselection Data transfer disconnect control is not used |
| MODE page 03h |
SCSI Format device page: 887 tracks per zone to use in dividing the capacity for the purpose of allocating alternate sectors 280 sectors per zone that shall be reserved for defect handling 2 tracks per zone that shall be reserved for defect handling 8 tracks per LUN that shall be reserved for defect handling 140 physical sectors per track 512 Bytes per physical sector Target-dependent interleave value is 1 24 sectors between last block of one track and first block of the next 24 sectors between last block of a cylinder and first block of the next one Drive supports hard-sectoring format Drive media is removable Sector addressing is progressively incremented in one surface before going to the next |
| MODE page 04h |
SCSI Rigid disk drive geometry page: 1 heads 4192 cylinders Write pre-compensation starts at cylinder 0 Write current reduction starts at cylinder 0 Heads park in cylinder 0 Medium rotates at 3600 rpm Spindle synchronization is disable or unsupported |
| MODE page 08h |
SCSI Caching mode page: Parameters can be saved Write-cache is enabled Data put by READ commands should be evicted from cache sooner than data put in read cache by other means Drive does not distinguish between cached write data No pre-fetch will be done |
| MODE page 0Ch | Unknown mode page |
| MODE page 20h | Unknown mode page |
| MODE page 00h | Unknown vendor mode page |