Aaru Report for IOMEGA BETA90 1.4

SCSI characteristics:
Vendor: IOMEGA
Product: BETA90
Revision: 1.4
Device is connected and supported.
Direct-access device
Device claims to comply with ANSI X3.131:1994 (SCSI-2)
Device does not claim to comply with any SCSI ECMA standard
Device does not claim to comply with any SCSI ISO/IEC standard
Device is removable
Device implements RESET as a soft reset
Device does not support asymmetrical access
Device supports only ST clocking
Device supports MODE SENSE (6)
Device is write protected.

SCSI mode sense pages:
Mode Contents
MODE page 01h SCSI Read-write error recovery page:
Automatic write reallocation is enabled
Automatic read reallocation is enabled
Drive will use the most expedient form of error recovery first
Drive will repeat read operations 11 times
MODE page 02h SCSI Disconnect-Reconnect mode page:
208 ratio of buffer that shall be full prior to attempting a reselection
128 ratio of buffer that shall be empty prior to attempting a reselection
Data transfer disconnect control is not used
MODE page 03h SCSI Format device page:
0 tracks per zone to use in dividing the capacity for the purpose of allocating alternate sectors
0 sectors per zone that shall be reserved for defect handling
0 tracks per zone that shall be reserved for defect handling
0 tracks per LUN that shall be reserved for defect handling
29 physical sectors per track
512 Bytes per physical sector
Target-dependent interleave value is 0
0 sectors between last block of one track and first block of the next
0 sectors between last block of a cylinder and first block of the next one
Drive supports hard-sectoring format
Drive media is removable
Sector addressing is progressively incremented in one surface before going to the next
MODE page 04h SCSI Rigid disk drive geometry page:
8 heads
758 cylinders
Write pre-compensation starts at cylinder 0
Write current reduction starts at cylinder 0
Heads park in cylinder 0
Spindle synchronization is disable or unsupported
MODE page 2Fh Unknown mode page

Tested media:
Information for medium named "Bernoulli Box II"
Medium type code: 00h
Drive recognizes this medium.
Medium manufactured by: IOMEGA
Medium model: Bernoulli Box II 90
Density code: 00h
Logical sector size: 512 bytes
READ LONG sector size: 564 bytes
Medium has 175856 blocks of 512 bytes each
Medium size: 90038272 bytes, 90 Mb, 85.87 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ LONG (10) command with this medium

Information for medium named "Bernoulli Box II"
Medium type code: 00h
Drive recognizes this medium.
Medium manufactured by: IOMEGA
Medium model: Bernoulli Box II 44
Density code: 00h
Logical sector size: 512 bytes
READ LONG sector size: 564 bytes
Medium has 87040 blocks of 512 bytes each
Medium size: 44564480 bytes, 44 Mb, 42.50 MiB
Device can use the READ LONG command in CHS mode with this medium
Device can use the READ CAPACITY (10) command with this medium
Device can use the READ (6) command with this medium
Device can use the READ (10) command with this medium
Device can use the READ LONG (10) command with this medium