ATA characteristics:
ATA device
Model: TOSHIBA HDWN180
Firmware revision: GX2M
Supported ATA versions: ATA-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7 ATA8-ACS ATA8-ACS2 ATA8-ACS3
Maximum ATA revision supported: ACS-3 Revision 5
Serial ATA device: : ATA8-AST SATA 1.0a SATA II Extensions SATA 2.5 SATA 2.6 SATA 3.0 SATA 3.1
PIO timing mode: 2
Advanced PIO: PIO0 PIO1
Single-word DMA: DMA0 DMA1 DMA2
Multi-word DMA: MDMA0 MDMA1 MDMA2
Ultra DMA: UDMA0 UDMA1 UDMA2 UDMA3 UDMA4 UDMA5 (active)
Logical sector size: 512 bytes
Physical sector size: 4096 bytes
Cylinders: 16383 max., 16383 current
Heads: 16 max., 16 current
Sectors per track: 63 max., 63 current
Sectors addressable in CHS mode: 16514064 max., 16514064 current
Device size in CHS mode: 8455200768 bytes, 8455 Mb, 8063.51 MiB
Sectors addressable in sectors in 28-bit LBA mode: 268435455
Device size in 28-bit LBA mode: 137438952960 bytes, 137 Gb, 128.00 GiB
Sectors addressable in sectors in 48-bit LBA mode: 15628053168
Device size in 48-bit LBA mode: 8001563222016 bytes, 8 Tb, 7.28 TiB

Device is fixed
Device does not require SET FEATURES to spin up and IDENTIFY DEVICE response is complete.
Device capabilities:
Standby time values are standard
IORDY is supported and can be disabled
DMA is supported
A maximum of 16 sectors can be transferred per interrupt on READ/WRITE MULTIPLE
Device supports setting a maximum of 16 sectors
At minimum 120 ns. transfer cycle time per word in MDMA, 120 ns. recommended
At minimum 120 ns. transfer cycle time per word in PIO, without flow control
At minimum 120 ns. transfer cycle time per word in PIO, with IORDY flow control
32 depth of queue maximum
SATA 1.5Gb/s is supported
SATA 3.0Gb/s is supported
SATA 6.0Gb/s is supported
Receipt of host initiated power management requests is supported
PHY Event counters are supported
Supports host automatic partial to slumber transitions is supported
Supports device automatic partial to slumber transitions is supported
NCQ is supported
Device nominal size is 3.5"
Command set and features:
NOP is supported and enabled
READ BUFFER is supported and enabled
WRITE BUFFER is supported and enabled
Host Protected Area is supported and enabled
Look-ahead read is supported and enabled
Write cache is supported and enabled
Power management is supported and enabled
Security mode is supported
28-bit LBA is supported
48-bit LBA is supported and enabled
FLUSH CACHE is supported and enabled
FLUSH CACHE EXT is supported and enabled
Device Configuration Overlay feature set is supported and enabled
SET MAX security extension is supported
Advanced Power Management is supported and enabled with value 128
DOWNLOAD MICROCODE is supported and enabled
S.M.A.R.T. is supported and enabled
S.M.A.R.T. Command Transport is supported
S.M.A.R.T. self-testing is supported and enabled
S.M.A.R.T. error logging is supported and enabled
Device has a World Wide Name
WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT are supported and enabled
General Purpose Logging is supported and enabled
DSN feature set is supported
Extended Power Conditions are supported
Extended Status Reporting is supported and enabled
Segmented feature in DOWNLOAD MICROCODE is supported and enabled
READ/WRITE DMA EXT GPL are supported and enabled
WRITE UNCORRECTABLE is supported and enabled
DOWNLOAD MICROCODE DMA is supported
READ LOG DMA EXT is supported
DMA Setup auto-activation is supported and enabled
Device-initiated power management is supported and enabled
Software Settings Preservation is supported
Security:
Security is not enabled
Supports enhanced security erase
66378 minutes to complete secure erase
66378 minutes to complete enhanced secure erase
Master password revision code: 65534
S.M.A.R.T. Command Transport (SCT):
SCT Write Same is supported
SCT Error Recovery Control is supported
SCT Features Control is supported
SCT Data Tables are supported

Device rotates at 7200 rpm
Device supports READ SECTOR(S) command in CHS mode
Device supports READ SECTOR(S) RETRY command in CHS mode
Device supports READ DMA command in CHS mode
Device supports READ DMA RETRY command in CHS mode
Device supports READ SECTOR(S) command in 28-bit LBA mode
Device supports READ SECTOR(S) RETRY command in 28-bit LBA mode
Device supports READ DMA command in 28-bit LBA mode
Device supports READ DMA RETRY command in 28-bit LBA mode
Device supports READ SECTOR(S) command in 48-bit LBA mode
Device supports READ DMA command in 48-bit LBA mode
Device supports SEEK command in CHS mode
Device supports SEEK command in 28-bit LBA mode