Mode | Contents |
---|---|
MODE page 02h |
SCSI Disconnect-Reconnect mode page: Parameters can be saved Data transfer disconnect control is not used |
MODE page 0Fh |
SCSI Data compression page: Parameters can be saved Drive supports data compression Data compression is enabled with an unknown algorithm coded 1 Data decompression is enabled Last data read was compressed with an unknown algorithm coded 1 Report exception on compression is set to 0 |
MODE page 10h |
SCSI Device configuration page: Parameters can be saved Active format: 0 Active partition: 0 Write buffer shall have a full ratio of 0 before being flushed to medium Read buffer shall have an empty ratio of 0 before more data is read from medium Drive will delay 600000 ms before buffered data is forcefully written to the medium even before buffer is full Medium supports block IDs Drive will pre-read until buffer is full Drive generates end-of-data Drive does not use compression |
MODE page 1Ch |
SCSI Informational exceptions control page: Informational exceptions are disabled |
EVPD | Contents |
---|---|
EVPD page 00h | Undecoded |
EVPD page 83h |
SCSI Device identification: Identifier belongs to addressed logical unit Inquiry descriptor contains: |
EVPD page F0h | Undecoded |