ATA characteristics:
ATA device
Model: WDC AC33200L
Firmware revision: 32.41N37
Supported ATA versions: ATA-1 ATA-2 ATA-3
Maximum ATA revision supported: Minor ATA version not specified
Parallel ATA device:
PIO timing mode: 2
Advanced PIO: PIO0 PIO1
Multi-word DMA: MDMA0 MDMA1 MDMA2 (active)
Ultra DMA: UDMA0 UDMA1 UDMA2 (active)
Logical sector size: 512 bytes
READ LONG sector size: 534 bytes
Cylinders: 6296 max., 6296 current
Heads: 16 max., 16 current
Sectors per track: 63 max., 63 current
Sectors addressable in CHS mode: 6346368 max., 6346368 current
Device size in CHS mode: 3249340416 bytes, 3249 Mb, 3098.81 MiB
Sectors addressable in sectors in 28-bit LBA mode: 6346368
Device size in 28-bit LBA mode: 3249340416 bytes, 3 Gb, 3.03 GiB
Bytes per unformatted track: 57600
Bytes per unformatted sector: 600

Device is fixed
Device transfer rate is > 5 Mb/s but <= 10 Mb/s
Device is hard sectored
Device is not MFM encoded
Format speed tolerance gap is required
Spindle motor control is implemented
Head switch time is bigger than 15 µs.
0 KiB of dual ported multi sector buffer with read caching
Device capabilities:
Standby time values are standard
IORDY is supported and can be disabled
DMA is supported
A maximum of 16 sectors can be transferred per interrupt on READ/WRITE MULTIPLE
Device supports setting a maximum of 16 sectors
At minimum 120 ns. transfer cycle time per word in MDMA, 120 ns. recommended
At minimum 160 ns. transfer cycle time per word in PIO, without flow control
At minimum 120 ns. transfer cycle time per word in PIO, with IORDY flow control
Command set and features:
Power management is supported
28-bit LBA is supported
S.M.A.R.T. is supported

Device supports READ SECTOR(S) command in CHS mode
Device supports READ SECTOR(S) RETRY command in CHS mode
Device supports READ DMA command in CHS mode
Device supports READ DMA RETRY command in CHS mode
Device supports READ LONG command in CHS mode
Device supports READ LONG RETRY command in CHS mode
Device supports READ SECTOR(S) command in 28-bit LBA mode
Device supports READ SECTOR(S) RETRY command in 28-bit LBA mode
Device supports READ DMA command in 28-bit LBA mode
Device supports READ DMA RETRY command in 28-bit LBA mode
Device supports READ LONG command in 28-bit LBA mode
Device supports READ LONG RETRY command in 28-bit LBA mode
Device supports SEEK command in CHS mode
Device supports SEEK command in 28-bit LBA mode